ispCP ω (OMEGA) HowTo Install for Debian Sarge, Etch, Lenny
================================================================================For other Linux distributions please check the other INSTALL files.
================================================================================
Table of Content
================
1) Version Info
2) Requirements
3) Introduction
4) Installation
5) Update
6) FAQ
7) Credits
================================================================================1) Version Info
---------------
ispCP ω Version: 1.0.0 RC4
INSTALL Script: 2.0
Maintainer: Benedikt Heintel
Homepage: http://www.isp-contol.net
Linux Distros: Debian Sarge, Etch, Lenny
================================================================================2) Requirements
---------------
There is no must have for a system using ispCP ω. This is only a recommendation:
Pentium III or K6-4 with 500 MHz
512 MB RAM
100 MB disk space (only for install of ispCP ω)
Debian (or even any other *NIX-Distribution)
All Sarge required packages are listed in ./docs/Debian/debian-packages-sarge
All Etch required packages are listed in ./docs/Debian/debian-packages-etch
All Lenny/Sid required packages are listed in ./docs/Debian/debian-packages-lenny
================================================================================3) Introduction
---------------
ispCP ω delivers a complete hosting automation appliance by offering significantsecurity, total-cost-of-ownership, and performance advantages over competing
commercial solutions.
With ispCP ω you can configure your server and applications, create user with
domains with a few point-and-click operations that take less than a minute.
There is no limit to the number of resellers, users and domains that can be
created. The core of ispCP ω are 3 easy-to-use, web-based control panels. ispCP
provides graphic user interfaces for the administrators, resellers and users.
================================================================================4) Installation
---------------
Make sure you are logged in as root.
1. Untar or unzip the distribution files to a secure directory:
# cd /root
# tar xjvf ispcp-omega-1.0.0-rc4.tar.bz2
2. Change to the newly created directory:
# cd ./ispcp-omega-1.0.0
3. Install the required modules
First update your system:
# apt-get update && apt-get upgrade
for Debian Sarge please use:
# apt-get install `cat ./docs/Debian/debian-packages-sarge`
for Debian Etch please use:
# apt-get install `cat ./docs/Debian/debian-packages-etch`
for Debian Lenny/Sid please use:
# apt-get install `cat ./docs/Debian/debian-packages-lenny`
Make sure you have added the non-free into your /etc/apt/sources.list:
deb http://ftp.debian.org/debian/ etch main contrib non-free
deb http://security.debian.org/ etch/updates main contrib non-free
If using Sarge, make sure you have added the following backport into your
/etc/apt/sources.list:
# backports
deb http://dotdeb.pimpmylinux.org/ sarge all
(when you get to the courier screen select 'no' to web directories)
(when you get to the postfix screen select 'internet site' and then type 'root'
for mail. If you've set debian up correctly on install your domain should be
already on screen. Select 'no' to force sync updates.)
(when you get to the proftpd screen, select 'standalone')
(when you get to the rootkithunter screen, select two time 'yes')
4. (optional) Check the ispcp.conf and adapt it to your requirements.
An overview over the variables you can find in the FAQ on
http://isp-control.net
5. Build the System by using make:
# make install
6. Copy all the directories into your system (you may make backups)
# cp -Rv /tmp/ispcp/* /
7. Now it's time to set up the frontend. Change into the engine directory:
# cd /var/www/ispcp/engine/setup
7a. Set the MySQL password, if not set:
# mysqladmin -u root password YOUR_PASSWORD
8. Start the engine setup:
# perl ispcp-setup
9. Install ispCP ω step-by-step
If you get no error, all went good; if you get one, look at
http://isp-control.net to solve the problem.
10. There is an error in some courier-versions. Courier won't stop, if you use
/etc/init.d/courier-authdaemon stop, so change it:
# nano /etc/init.d/courier-authdaemon
change: ${libexecdir}/authlib/authdaemon stop
with: killall authdaemond.plain
11. Clean the temporary folders:
# rm -fR /tmp/ispcp
================================================================================5) Update
---------
Make sure you are logged in as root.
1. Untar or unzip the distribution files to a secure directory:
# cd /root
# tar xjvf ispcp-omega-1.0.0-rc4.tar.bz2
2. Change to the newly created directory:
# cd ./ispcp-omega-1.0.0
3. Install the required modules
first update your system:
# apt-get update && apt-get upgrade
for Debian Sarge please use:
# apt-get install `cat ./docs/Debian/debian-packages-sarge`
for Debian Etch please use:
# apt-get install `cat ./docs/Debian/debian-packages-etch`
for Debian Lenny/Sid please use:
# apt-get install `cat ./docs/Debian/debian-packages-lenny`
Make sure you have added the non-free into your /etc/apt/sources.list:
deb http://ftp.debian.org/debian/ etch main contrib non-free
deb http://security.debian.org/ etch/updates main contrib non-free
If using Sarge, make sure you have added the following backport into your
/etc/apt/sources.list:
# backports
deb http://dotdeb.pimpmylinux.org/ sarge all
(when you get to the courier screen select 'no' to web directories)
(when you get to the postfix screen select 'internet site' and then type 'root'
for mail. If you've set debian up correctly on install your domain should be
already on screen. Select 'no' to force sync updates.)
(when you get to the proftpd screen, select 'standalone')
(when you get to the rootkithunter screen, select two time 'yes')
4. (optional) Check the ispcp.conf and adapt it to your requirements.
An overview over the variables you can find in the FAQ on
http://isp-control.net
5. Build the System by using make:
# make install
6. Save key files
# cp -v /var/www/ispcp/engine/ispcp-db-keys.pl /tmp/ispcp/var/www/ispcp/engine/
# cp -v /var/www/ispcp/engine/messager/ispcp-db-keys.pl /tmp/ispcp/var/www/ispcp/engine/messager/
# cp -v /var/www/ispcp/gui/include/ispcp-db-keys.php /tmp/ispcp/var/www/ispcp/gui/include/
If updating from RC3 or higher:
# cp -v /var/www/ispcp/gui/tools/pma/config.inc.php /tmp/ispcp/var/www/ispcp/gui/tools/pma/
7. Copy /usr and /var directories into your system (you may make backups)
# cp -Rv /tmp/ispcp/usr/* /usr/
# cp -Rv /tmp/ispcp/var/* /var/
8. Backup ispcp.conf and copy the /etc dircetory into your system (you may make backups):
# mv -v /etc/ispcp/ispcp.conf /etc/ispcp/ispcp.old.conf
# cp -Rv /tmp/ispcp/etc/* /etc/
9. Now it's time to update your installation. Change into the engine directory:
# cd /var/www/ispcp/engine/setup
10. Start the engine update:
# perl ispcp-update
11. Update ispCP ω step-by-step
If you get no error, all went good; if you get one, look at
http://isp-control.net to solve the problem.
12. Clean the temporary folders:
# rm -fR /tmp/ispcp
================================================================================6) FAQ
------
Q.- How can I prevent websites using more than their bandwidth limit to stop working?
A.- If you have installed the apache2-mod-cband (available for etch and lenny/sid)
all you need to do is:
# a2enmod cband
note that you might want to review /etc/apache2/mods-available/cband.conf
to disable the /cband-status and /cband-status-me handlers.
Please check http://www.isp-control.net for any questions not answered in this file.
================================================================================7) Credits
----------
ispCP ω is a project of ispCP | isp Control Panel.
Please visit our site under http://isp-control.net for further information on
ispCP ω, ispCP and other themes.
We hope you enjoy using ispCP ω. If you like it, help us, to make it better. We
would be glad on any help provided!
|